ocr: number of cylinders the drive has - you'll just lose a small fraction of the drive's capacity. Press the End key ("1" on the keypad) or E key (which key depends on the BIOS version) when you are satisfied with your choice, The Bridgeboard will reboot. Follow the controller and drive manufacturer's procedure for "low-level formatting" or "prepping" the hard drive. This is *not* MS-DOS FDISK or FORMAT. Some controllers and/or drives do not need this step. If the procedure requires that you run MS-DOS DEBUG, you'll find it on the MS-DOS 4.01 "Operating System 1" disk. NOTE: The MS-DOS INSTALL pro ...
(.png)
